"Bughunter dVideo BDV-01" helps to protect you from unrighteous interference in your private life
Detects spy cameras whether they are ON or OFF
Detecting distance - up to 18 m (59 ft)
Operation time - up to 10 hours
Detects cameras at any illumination
Operating principle is based on the effect of the reverse flare. Device emits light and receives the reflected emission (including the reflected flares from spy cameras). Since the brightness of the reflected beam from the camera lens is several times higher than the reflections from other objects, then determining the location of a camera is quite simple.
Latent videorecording equipment can be installed in saunas, hotels, restaurants, locker rooms, and sport clubs, tanning salons, offices, shop fitting rooms, hostels and rental apartments as well as in many other places. The device runs under command of microcontroller with embedded software. It is a portable device designed to detect spy cameras (veiled as different interior items) regardless of whether they are ON or OFF. The device can detect not only wired cameras but also wireless devices which use transmitters capable of sending information to the distance from 10 to 100 meters (33 to 330 ft). The basic rule to detect spy cameras is that the search should be performed in a place where people could probably install a spy camera. The most likely places for camera installation are spot that allow easy observation of working spaces, resting places (chairs, sofas, etc.) and doorways. The camera can be installed in a hollow space of a suspended ceiling, in premise’s corners, ventilation shaft, furniture elements (wardrobe, mezzanine, etc.), comfort items or audio-video equipment, etc. You must consider that there may be several cameras. Detection of one or two video cameras should not be a reason to consider the room completely cleared. It is necessary to check all the places from where a latent recording can be performed to be 100% sure. To determine what flare you see - spy camera lens or simply a reflection on a smooth surface (e.g. glass or mirror) – you can move aside slightly and continue to observe the same area with the working device. In this case a simple flare disappears, shifts or significantly changes its intensity. However, the bright point of the camera lens remains in the same place and there is a slight change in flare intensity until you stay in a sweep of a camera. Still you need to remember about the optimal working distance which is not more than 18 meters (59 feet) and that the camera can be detected only within its coverage range. Consequently, for more certainty it is recommended to observe the most suspicious places from different angles.